2018 new design high precision pipe laser cutting machine with max laser source

peiriant pibell torri laser

Deunyddiau 1.Application:

Offer Torri Laser Ffibr yn addas ar gyfer torri metel gyda Dalen Dur Di-staen, Plât Dur Ysgafn, Dalen Dur Carbon, Plât Dur Alloy, Dalen Dur Gwanwyn, Plât Haearn, Haearn Galfanedig, Dalen Galfanedig, Plât Alwminiwm, Taflen Gopr, Taflen Bres, Plât Efydd, Plât Aur, Plât Arian, Plât Titaniwm, Dalen Fetel, Plât Metel, Tiwbiau a Phibellau, ac ati

Machine parameters for laser generator:

Eitem	Paramedrau
Math o laser	Laser ffibr
Pwer	500W/1000W/1500W/2000W/3000W/4000W/6000W/8000W/12000W
Wave length	1070-1080nm
Electro-optical conversion efficiency	25-30%
XYZ Route	3025mm / 1525mm / 100mm
Material Cutting thickness	0.2-8mm
Cutting seam width	0.1-0.2mm
Ailadrodd cywirdeb safle	±0.05mm/500mm
Cywirdeb lleoli	±0.05mm/500mm
Cyflymder Max.Moving	60000mm / mun
Max.Accerlation speed	25m / mun
Max.loading weight	500kg
Pwysau peiriant	2300kg
Required Power	220V 50Hz/60Hz
Machine size(LWH)	4500mm2450mm1700mm

Configuration of fiber laser cutter:

	Disgrifiad	Qty	Original	Brand
1	Fiber laser source (500W/800W)	1SET	China	MAX
2	Pen torri laser	1PC	Switzerland	RAYTOOLS
3	Machine bed and accessories	1SET	China
4	Electric control	1SET		OMRON,Schneider
5	Gas circuit control	1SET	Japan	SMC
6	Precise Rack	Each 3SETS	China
7	Precise linear guide rail	Each 3SETS	Taiwan	PMI
8	Planetary Gear	3SET	China
9	Machine bed accessories	1SET	China
10	Digital cutting system	1SET	USA	AHEADCUT
11	Industrial control computer	1SET	China	AHEADCUT
12	Communication servo and driver	4SETS	China
13	Uned Oeri	1SET	China
14	Waste recycling equipment	1SET	China

Equipment work and environmental requirements

Requirement

Power supply: regulated stable power supply: (recommended)

(1)rated output voltage: 220 v

(2) voltage frequency: 50 hz

(3) the stability of the two phase voltage + 5%

(4) the output voltage adjustment rate: < 2%

Cutting with auxiliary gas:

Clean, dry compressed air and high purity oxygen (O2) and nitrogen (N2) ,purity no less than 99.9% purity

Torri deunydd

Sheet material is even, smooth;Clean the surface

The compressed air supply device

(1) the rated pressure: 14 bar

(2)Capacityt: 1 m3

Theory Cutting parameter

Power(W)	Deunydd	Trwch (mm)	Cyflymder torri (m / mun)	Nwy
800	Dur gwrthstaen	1	8-9	N2
		2	5-6	N2
		3	1.8-2	N2
		4	1.2-1.3	N2
800	Dur carbon	1	8-10	O2
		2	4-5	O2
		3	2.8-3	O2
		4	1.4-1.8	O2
		5	1.2-1.5	O2
		6	0.9-1.1	O2
		8	0.6-0.7	O2

Power(W)	Deunydd	Trwch (mm)	Cyflymder torri (m / mun)	Nwy
500	Dur gwrthstaen	1	6-8	N2
		2	2-2.2	N2
		3	0.6-0.8	N2
500	Dur carbon	1	7-8	O2
		2	3.5-4	O2
		3	2.8-3.2	O2
		4	1.3-1.5	O2
		5	0.9-1.1	O2
		6	0.6-0.7	O2